wearing course gradation in asphalt mix design

Shanghai Doan Machinery Technology Co.,Ltd is a road repair machine manufacturing factory ,which is specialized in manufacturing Asphalt Distributor,Crack Router,Crack Sealing Machine,Chip Spreader,road roller,Asphalt Mixing Plant ,etc.
we own dozens of advanced production lines and advanced production technology and high quality professional management talents to ensure excellent product quality.

Our products include:

Terms:

1) Delivery term: FOB,CNF CIF

2) Delivery lead time: 30 days after receive T/T deposit.

3) Payment term: .30% as deposit by T/T, balance will be paid by T/T against the copy of B/L.

4) Quality assurance: Test Certificate is supplied with shipment, third Party Inspection is acceptable.

Our Advantage:

1.Operating radius is small, can work in a small area,suitable for groove backfill;
2.With HONDA gasoline engine or famous water-cooled diesel engine,superior performance,easy to operate;
3.With international famous brand PH hydrauulic drive unit,infinitely variable speed;
4.Hydraulic steering,reversing conveniently; Vibratory Road Roller
5.Internationally renowned NSK Bearings,MITSUBOSHI (Samsung) belt, to ensure the work performance of machine;

Inquiry Us Inquiry For More Information!Send Email To: [email protected]

  • Asphalt Pavement Thickness and Mix Design - Asphalt …

    Asphalt Pavement Thickness and Mix Design While there are an infinite number of questions that can be asked, we compiled a list of those questions that have been directed to us the most. These FAQs are categorized into subject areas listed in the contents dropdown box below.

    Learn more

  • Ultra Thin Bonded Wearing Course - The …

    • Develop a mix design for approval at least 30 days before placement • Test Section, minimum 200 ton for each ... C Ultra Thin Bonded Wearing Course (UTBWC) $6.32 $145.00 @ 0.75 0.18 0.135 ... SUPERPAVE ASPHALT MIX 9.5MM FOR SURFACE PG 64S-22 $6.47 $74.20 @ 1.5 0.44 0.66 SUPERPAVE ASPHALT MIX 9.5MM FOR …

    Learn more

  • Asphalt Mix Design and Analysis Towards …

    • Gradation, • Nature of the filler (particle size distribution), • Binder content, • Filler content, • Filler/binder ratio, and, • Compaction temperature The investigation was carried out by evaluating the volumetric properties of laboratory compacted wearing course specimens and selected variation of certain influencing factors.

    Learn more

  • Hot Mix Asphalts 101 - New Jersey

    Asphalt Stiffness Aggregate Gradation Asphalt Content Degree of Compaction ... • Used as a wearing course (e.g., SMA) • Mix design methods – AASHTO R46-08, Designing Stone Matrix Asphalt (SMA) – Some states have variations of AASHTO R46 ... Hot Mix Asphalts 101 ...

    Learn more

  • 34553-03 Design Guide - pa-asphalt

    The asphalt mixtures referred to in this manual are PENNDOT Job Mix Designs which are readily available throughout Pennsylvania and have proven through extensive use to have all of the desirable characteristics of good asphalt pavements. PENNDOT’s Bulletin 27 (Publication 27) provides the specifications for HMA mix design and procedures.

    Learn more

  • Influence of Variation in the Aggregate …

    design, wearing course, hot mix asphalt. determine in what proportion the aggregates from different stock piles can be combined to produce a specific gradation I. …

    Learn more

  • HOT MIX ASPHALT PAVEMENT DESIGN GUIDE

    gradation. Furthermore,Maryland hot mix asphalt mixtures ... as a final wearing course for structural repairs or resurfacings. SMA (Stone Matrix Asphalt) ... PAVEMENT DESIGN The design of a hot mix asphalt pavement requires some knowledge of the following TRAFFIC DRAINAGE

    Learn more

  • EVALUATION OF LIMESTONE COARSE …

    EVALUATION OF LIMESTONE COARSE AGGREGATE IN ASPHALT CONCRETE WEARING COURSES Final Report Project Number 2019-10 by Deepak Manglorkar P.S. (Ken) Kandhal Frazier Parker ... Marshall mix design ..... . Modified Lottman test ..... . Polishing and frictional properties of ...

    Learn more

  • Selecting the Proper Asphalt ODOT …

    ODOT Pavement Design Manual ... Gradation Aggregate top size Standard ODOT Mixes, Rev. July 2014 Item, Description, Type Surface Course Mixes 441,Asphalt Concrete Surface Course, Type 1,(446/8), PG64-22* 442,Asphalt Concrete Surface Course, 9.5 mm, Type A or B, (446/8)

    Learn more

  • HMA Pavement Mix Type Selection Guide

    The HMA Pavement Mix Type Selection Guide pro-vides designers with methods for selecting appropriate mix types while considering factors such as traffic, en-vironment, subsurface pavement structure, existing pavement condition and preparation, and economics. The pavement mix types targeted are OGFC, SMA, and fine-and coarse …

    Learn more

  • BULLETIN - dot.state.pa.us

    place of laboratory testing of the completed mix for asphalt content. Appendix G describes the Department Hot-Mix Asphalt surge silo/storage system approval procedure. Appendix H . gives Department Superpave design guidelines for using hot-mix recycled asphalt pavement (RAP) and manufacturer waste recycled asphalt shingles (RAS).

    Learn more

  • Influence of Variation in the Aggregate …

    design, wearing course, hot mix asphalt. determine in what proportion the aggregates from different stock piles can be combined to produce a specific gradation I. …

    Learn more

  • Standard Washington State Hot Mix Asphalt Types ...

    This was WSDOT’s “standard” surface course paving mix for lower volume roads. It was supplanted by the Class 1/2 inch HMA Superpave design. Class D. An open-graded HMA. Typically, Class D mixes are placed as 0.70 inch thick wearing courses (essentially, an Open Graded Friction Course for surface applications).

    Learn more

  • Open-Graded - Pavement Interactive

    Open-graded mix design generally consists of 1) material selection, 2) gradation, 3) compaction and void determination and 4) asphalt binder drain-down evaluation. NCAT Report 99-3 Design of New-Generation Open Graded Friction Courses provides a recommended mix design procedure for OGFCs.

    Learn more

  • Evaluation of the effect of Superpave aggregate …

    restricted zone, Superpave gradation, wearing course. ... for hot mix asphalt (HMA) design have been devised, which first attempted to evaluate various properties of bituminous mixtures. Some of the more widely known of these design procedures are the Marshall, Hveem,

    Learn more

  • Superpave Asphalt Mixture Design Workshop

    Selection of the design aggregate structure (design blend) consists of determining the aggregate stockpile proportions and corresponding combined gradations of the mix design. The design aggregate structure, when blended at the optimum asphalt binder content, should yield acceptable volumetric properties based on the established criteria.

    Learn more

  • Superpave Volumetric Mix Design - Asphalt …

    Superpave Volumetric Mix Design . AASHTO Designation M 323-12 . American Association of State Highway and Transportation Officials 444 North Capitol Street N.W., Suite 249 Washington, D.C. 20001 . ... Mix Asphalt Mix Design Methods for Asphalt Concrete and Other Hot-Mix Types 2.4.

    Learn more

  • Design of Ultra-Thin Bonded Wearing Course …

    DESIGN OF ULTRA-THIN BONDED HOT MIX WEARING COURSE (UTBHMWC) MIXTURES TXDOT DESIGNATION TEX-247-F CONSTRUCTION DIVISION 3 – 16 08/08–08/16 gradations on the Combined Gradation worksheet. Use the construction stockpile gradation when it is available. 3.1.5 Check the aggregate gradations for …

    Learn more

  • Asphalt Pavement Construction - Asphalt Institute

    Mix temperature is dependent on the grade of asphalt used in the mix Less viscous asphalt requires lower temperatures, while more viscous asphalt requiers higher temperatures. At the start of a mix design, target temperatures are specified for proper mixing and compaction.

    Learn more

  • SECTION 661 ULTRA-THIN BONDED WEARING …

    Use the mix design and optimum asphalt content for Ultra-thin Bonded Wearing 9 Course Mix Design Guidelines on file with the Materials and …

    Learn more

  • HMA Pavement Mix Type Selection Guide

    Mix Design for Mix Types _____8 Dense-Graded Mixes _____ 8 ... tives on the topic of pavement mix types by FHWA and the National Asphalt Pavement Association (NAPA). The ... 2 HMA PAVEMENT MIX TYPE SELECTION GUIDE. Traffic Designation ESALs Typical Roadway Applications

    Learn more

  • (2360) PLANT MIXED ASPHALT PAVEMENT …

    Design the mixture with the same asphalt binder supplied to the plant site using mixture option 1, “Laboratory Mixture Design” or mixture option 2, “Modified Mixture Design.” Provide documentation with either design option and include the amount of anti-strip needed to meet the minimum tensile strength requirements.

    Learn more

  • Chapter 11 Bonded Wearing Course

    Chapter 11 Bonded Wearing Course ... Hot Mix Asphalt Overlay placed over a polymer modified emulsion membrane which ... Bonded Wearing Course Training Modules Available 1. Design, Materials & Specifications 2. Construction & Inspection Rt. 103 Chapter 11 – Bonded Wearing Course.

    Learn more

  • Selecting the Proper Asphalt ODOT …

    ODOT Pavement Design Manual ... Gradation Aggregate top size Standard ODOT Mixes, Rev. July 2014 Item, Description, Type Surface Course Mixes 441,Asphalt Concrete Surface Course, Type 1,(446/8), PG64-22* 442,Asphalt Concrete Surface Course, 9.5 mm, Type A or B, (446/8)

    Learn more

  • DRAFT Guidance Specification for Porous or …

    Gyratory (50 gyrations) mix design. The Contractor shall provide all data necessary (aggregate and mixture) and pay all costs. b) All mixture shall be designated as wearing course. c) Additional information can be found in Appendix A of NAPA’s Porous Asphalt Pavements, Quality Improvement Series 131, however these specs shall take …

    Learn more